CodeMeter and WibuKey Driver Downloads (2024)

CodeMeter (hardware and software based) and WibuKey (hardware-based) are protection keys for Archicad and other Graphisoft products. A protection key is necessary to run Archicad and other Graphisoft products in commercial mode.

Table of Contents

Short Introduction
Important Notes
CodeMeter Driver Downloads
CodeMeter Protection Key Updater
WibuKey Driver Downloads
CodeMeter Enablers

Important Note for macOS users

The macOS 10.15 Catalina compatible WIBU-Key Runtime 6.52 is availablehere.

Short Introduction

The CodeMeter protection key (software or hardware-based) represents your license to use Archicad. You can use it to transfer the license from one machine to another. It is also possible to borrow a license for a particular machine for a limited time, without having to transfer the physical network protection key itself. Thus, the CodeMeter technology significantly reduces the risk of a lost or stolen hardware key.
An office using Archicad will probably have one network key and several CodeMeter keys (software-based license keys or physical CodeMeter keyplugs). If the user plans to be out of the office or offline, three options are available:

  • The CmStick can be used to borrow a license from the site. Archicad will run on any machine to which this CmStick is physically attached.
  • A license file can be bound to the user’s computer, so there is no need to carry along an extra hardware device.
  • Upload Software Key to the Company License Poolanddownload it onto another machine.

In the first two cases, the user borrows the license for a fixed period. The license can be returned by the user, or else it will expire automatically when the borrowing period ends; at this time, the license again becomes available for borrowing from the site key.

Please keep in mind that if a computer is damaged or the CmStick is lost, the user cannot return the borrowed license, which thus remains unavailable until the borrowing period expires. So it makes sense to set borrowing time limits wisely.

You can learn more about CodeMeter protection onHelpCenter.

Important Notes before Installation

  • When installing CodeMeter you must be logged on as amember of the Administrator Group.
  • The drivers below were tested by Graphisoft to use with Archicad. To activate purchased licenses on your key, follow our activation steps:https://www.graphisoft.com/downloads/licensing/
  • Before uninstalling or installing CodeMeter drivers on computers from/to which CodeMeter licenses were borrowed, it is very important to make sure that all licenses are returned!
  • Remove the keyplug before you are installing the driver.
  • Please quit the browser during the WibuKey driver installation.

CodeMeter Drivers

For Archicad 10 to Archicad 27

Download the appropriate installer for your computer’s operating system. By double-clicking on the downloaded file the installer wizard will automatically start and guide you through the rest of the installation.
This CodeMeter driver version can be used with Archicad version 10 to version 27.
If you want to use Archicadversion 10 to version 12with a CodeMeter protection key please install theCodeMeter Enabler.

This CodeMeter driver supports:

  • Windows 10, Windows 8.1, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
  • macOS 11, macOS 10.15, macOS 10.14
Download Windows macOSLast modified
CodeMeter Driver 7.60
142.4 MB

90.4 MB
November 7, 2023

Note:This is how to uninstall CodeMeter driver:

  • Windows: Open “Control Panel” and select “Programs and Features” or “Add or Remove Programs” to remove all CodeMeter components from your computer.
  • macOS: Start “CmUninstall” application within the downloaded installer package to remove all CodeMeter components from your computer.

CodeMeter Protection Key Updater

With the macOS 10.13 (High Sierra), Apple introduced strict policy regarding the USB devices which use Kernel Extension. CodeMeter hardware keys distributed by Graphisoft use Kernel Extension 3G. In order to keep the stability and flexibility of our protection keys, they must be configured as HID (Human Interface Device). Download the standalone Protection Key Updater fromhere.

WibuKey Drivers

For Archicad 10 to Archicad 18

This WibuKey driver supports:

  • Windows 10, Windows 8.1, Windows 8, Windows Server 2012 R2, Windows Server 2016
  • macOS 10.9 and above

Note for MAC users:

  • WibuKey driver requires Java 6 to work properly. If it is not present on your computer use theJava 6u32installer to install Java 6 separately. Running Wibu Server on macOS can result in connection issues.
  • The WibuKey Driver version 6.52 brings macOS 10.15 Catalina compatibility.

Note for users on Windows 8 and later: this driver only runs with single WibuKey.

Download WindowsMac OS XLast modified
WibuKey Driver version 6.52 for macOS 10.15N/A
9.8 MB
Nov 13, 2019
WibuKey Driver version 6.40
21.1 MB

7.6 MB
Nov 14, 2018

For Archicad 7 to Archicad 9

This WibuKey driver supports:

  • Windows 7, Windows Vista, Windows XP, Windows 2000
  • Mac OS X 10.7, Mac OS X 10.6, Mac OS X 10.5, Mac OS X 10.4

Note for MAC users: WibuKey driver requires Java 6 to work properly. If it is not present on your computer use theJava 6u32installer to install Java 6 separately.

Download Windows 32-bitWindows 64-bit Mac OS XLast modified
WibuKey Driver version 6.00b for Windows and 6.00a for Mac
13 MB

14 MB

9 MB
Oct 25, 2012

WkMAC.LIB for Archicad 9 on Mac OS X 10.6 (Snow Leopard)

This component is necessary for those using Archicad 9 on Snow Leopard. Unarchive this file and put into the Library:CFMSupport folder on your HD.

Download Windows Mac OS XLast modified
WkMAC.LIB for Archicad 9 on Mac OS X 10.6
3 KB
Sept 7, 2009

CodeMeter Enabler Downloads

CodeMeter Enabler lets you run Archicad 10, 11, and 12 with a CodeMeter hardware key.
Note: this tool was only available for users with Archicad 13 or later licenses.

Notes

  • CodeMeter enabler is available onWindowsandIntel Macplatforms. CodeMeter is not supported on Mac PPC systems.
  • Make sure yourArchicad is up-to-date: use ‘Check for Updates…’ command in Archicad’s Help menu. CodeMeter enabler will only work with a minimum Archicad build 2815.
  • Do not remove the WibuKey driverfrom your system. Both CodeMeter and WibuKey drivers need to be installed.

Installation Steps

  • Read notes for CodeMeter enabler above.
  • Download and install CodeMeter enabler below – it will copy the necessary components in your Archicad folder.
  • If you have not installed a CodeMeter driver yet, download and install thelatest CodeMeter driver. CodeMeter driver is also installed with Archicad, but only if this option was selected during the Archicad install process for these legacy versions.

CodeMeter Enabler (build 2815)

  • Does NOT supportSoftware Key
  • Installer compatible with Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP, Mac OS X 10.8
Downloads for CodeMeter Enabler Windows Mac OS XLast modified
CodeMeter Enabler for Archicad 12 (build 2782)
61.6 MB

56.2 MB
Sep 10, 2018
CodeMeter Enabler for Archicad 11 (build 1259)
61.6 MB

70.0 MB
Sep 10, 2018
CodeMeter Enabler for Archicad 10 (build 1188)
61.6 MB

71.7 MB
Sep 10, 2018
CodeMeter and WibuKey Driver Downloads (2024)
Top Articles
Latest Posts
Article information

Author: Rueben Jacobs

Last Updated:

Views: 6456

Rating: 4.7 / 5 (77 voted)

Reviews: 92% of readers found this page helpful

Author information

Name: Rueben Jacobs

Birthday: 1999-03-14

Address: 951 Caterina Walk, Schambergerside, CA 67667-0896

Phone: +6881806848632

Job: Internal Education Planner

Hobby: Candle making, Cabaret, Poi, Gambling, Rock climbing, Wood carving, Computer programming

Introduction: My name is Rueben Jacobs, I am a cooperative, beautiful, kind, comfortable, glamorous, open, magnificent person who loves writing and wants to share my knowledge and understanding with you.